eFlo 2.0 Standard
eFlo 2.0 Standard gas flow measurement and control up to 350 mbar
Measures and controls the flow of common process gases up to 350 mbar, with pressure and temperature compensation and calibration that can be certified in place.
eFlo mass flow
Flow meters
eFlo Mass Flow Meter
DesignationeFlo mass flow
Measures and controls the mass flow rate of gases and liquids in industrial and commercial applications where accuracy is critical.
- Mass flow calculation for gases and liquids
- Suitable for a wide range of industrial gases and liquids
- Gas flow range: 0 to 4.52 m3/h
- Inlet pressure: 0.35 to 3.5 bar
- Pressure and temperature compensation using two sensors
- NIST-traceable calibration with on-site flow verification ports
- Integrated communications via Modbus RTU over RS485, Ethernet TCP and EtherNet/IP
- Compatible with industrial process controllers and PLCs
- Configurable flow alarms
- SCADA integration
- Built-in flow totaliser
- Gas consumption measurement for cost assessment
- Meets AMS and CQI verification requirements
- Several communication options
- Simple configuration
- Real-time and historical data
- Configuration from a PC or a mobile device
- Power required24 VDC @ 1 A
- Accuracy±4%
- Turndown ratio6:1
- Gas temperature limits0 °C to 50 °C
- Ambient temperature limits0 °C to 50 °C
Opis
SSi mass flow meters are used in a wide range of industrial and commercial applications to measure and control the mass flow rate of gases or liquids wherever accuracy and precision are critical. This meter measures mass per unit of time rather than volume per unit of time, which is what standard manual or electronic flow meters report. Pressure and temperature are compensated by two dedicated sensors, so the indicated value stays correct as process conditions change.
The meter is supplied with NIST-traceable calibration and with flow verification ports that allow the calibration to be checked in place, which satisfies AMS and CQI verification requirements. Integrated communications and configurable flow alarms let the instrument be tied directly into process controllers, PLCs and plant SCADA, while the built-in totaliser records gas consumption for cost analysis.
Dane techniczne
| Power required | 24 VDC @ 1 A |
|---|---|
| Accuracy | ±4% |
| Turndown ratio | 6:1 |
| Gas temperature limits | 0 °C to 50 °C |
| Ambient temperature limits | 0 °C to 50 °C |
| Flow output signal (linear) | 4-20 mA |
| Maximum output signal load | 500 Ω |
| Input control signal (linear) | 4-20 mA |
| Response time | 1-10 seconds |
| Communications | RS485, Ethernet/IP |
| Communications protocol | Modbus RTU, Modbus TCP |
Applications
It works where the atmosphere decides the quality of the case
The probe measures and controls the carbon potential in controlled atmospheres, whatever the furnace design.
Furnace types
01Measurement and control of process gas flow in heat treatment plants
02Gas consumption monitoring for cost and energy reporting
03Industrial and commercial applications requiring high measuring accuracy
Enquiry
Ask about this product
Enquiry sent
We reply within one working day, with a configuration and a quotation.
From the same group
Whole groupeFlo 2.0 HiPr
eFlo 2.0 HiPr gas and liquid flow measurement and control up to 6 bar
Measures and controls the flow of standard and aggressive liquids and gases at pressures up to 6 bar, and its calibration can be certified in place.
eFlo Inline
eFlo Inline Meter
Displays current and totalised gas flow and retrofits easily into existing flow measuring equipment and control systems.