eFlo 2.0 Standard
eFlo 2.0 Standard gas flow measurement and control up to 350 mbar
Measures and controls the flow of common process gases up to 350 mbar, with pressure and temperature compensation and calibration that can be certified in place.
eFlo Inline
Flow meters
eFlo Inline Meter
DesignationeFlo Inline
Displays current and totalised gas flow and retrofits easily into existing flow measuring equipment and control systems.
- Digital display with easy-to-use keypad and optional touchscreen
- Pressure and temperature compensation
- Current flow and totalised flow indication
- Built-in high and low flow alarms
- Easy retrofit for existing flow measuring equipment
- Flow calibration certifiable for CQI-9 requirements while in use
- NIST-traceable calibration
- SCADA integration for current flow, totalised flow and cost calculation
- Analogue feedback for data acquisition systems
- Integrated communications via Modbus over RS485, Ethernet and USB
- Mobile-friendly and web-based remote configuration
- Two pipe size options: 1 1/4" and 2"
- Natural gas, air, nitrogen, endothermic gas, ammonia and other industrial gases
- Power required24 VDC @ 400 mA
- Accuracy±4%
- Gas temperature limits0 °C to 65.6 °C (32 °F to 150 °F)
- Ambient temperature limits0 °C to 65.6 °C (32 °F to 150 °F)
- Flow output signal (linear)4-20 mA
Opis
The eFlo Inline Meter is designed to display current and totalised gas flow. With simple compatibility with existing controls, tracking gas flows has never been easier. The meter has a digital display with an easy-to-use keypad and an optional touchscreen, and pressure and temperature compensation keeps the calculated flow accurate as conditions change.
The unit is an easy retrofit for existing flow measuring equipment and can be flow-calibrated in place to meet CQI-9 requirements. Calibration is NIST-traceable. Integrated communications and analogue feedback allow current flow, totalised flow and gas cost to be passed to data acquisition systems and plant SCADA, while high and low flow alarms are built in. The meter handles natural gas, air, nitrogen, endothermic gas, ammonia and other industrial gases and is available in two pipe sizes.
Dane techniczne
| Power required | 24 VDC @ 400 mA |
|---|---|
| Accuracy | ±4% |
| Gas temperature limits | 0 °C to 65.6 °C (32 °F to 150 °F) |
| Ambient temperature limits | 0 °C to 65.6 °C (32 °F to 150 °F) |
| Flow output signal (linear) | 4-20 mA |
| Maximum output signal load | 500 Ω |
| Response time | 1-10 seconds |
| Communications | RS485, Ethernet, USB |
| Communications protocol | Modbus RTU, Modbus TCP |
| Flow meter pressure limits | 5 psig max. (standard) |
| Pipe fitting | 1 1/4" or 2" NPT |
Applications
It works where the atmosphere decides the quality of the case
The probe measures and controls the carbon potential in controlled atmospheres, whatever the furnace design.
Furnace types
01Monitoring and totalising of gas flow in heat treatment plants
02Retrofit replacement of manual flow meters in existing installations
03Gas consumption and cost reporting through SCADA
Enquiry
Ask about this product
Enquiry sent
We reply within one working day, with a configuration and a quotation.
From the same group
Whole groupeFlo 2.0 HiPr
eFlo 2.0 HiPr gas and liquid flow measurement and control up to 6 bar
Measures and controls the flow of standard and aggressive liquids and gases at pressures up to 6 bar, and its calibration can be certified in place.
eFlo mass flow
eFlo Mass Flow Meter
Measures and controls the mass flow rate of gases and liquids in industrial and commercial applications where accuracy is critical.